BLNRF - INTLRZINC QHA027 POWDER, QHA027
- MSDS: BLNRF
- Manufacturer: INTERNATIONAL PAINT INC
- Product Name: INTLRZINC QHA027 POWDER, QHA027
- National Stock Number: 8010-00N021289
Product Identification
Product ID:INTLRZINC QHA027 POWDER, QHA027
MSDS Date:11/09/1989
FSC:8010
NIIN:00N021289
MSDS Number: BLNRF
Responsible Party
US
Emergency Phone: 713-682-1711;800-854-6313
Info Phone: 713-682-1711
Cage: 26351
Contractor
Telephone: 800-589-1267/800-854-6813
Cage: 26351
Ingredients
LEAD (SARA III)
CAS: 7439-92-1
RTECS: OF7525000
Fraction By Weight: 0.150%
OSHA PEL 0.05 MG/M3;1910.1025
ACGIH TLV: 0.15 MG/M3;DUST 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
ZINC (SARA III)
CAS: 7440-66-6
RTECS: ZG8600000
Fraction By Weight: 95-100%
OSHA PEL 10 MG ZNO/M3
ACGIH TLV: 10 MG ZNO/M3; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ZINC OXIDE
CAS: 1314-13-2
RTECS: ZH4810000
Fraction By Weight: 1-5%
OSHA PEL 15MG/M3 TDUST/5 FUME
ACGIH TLV: 10MG/M3 TDUST; 9293
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYE:IRRITATION MAY OCCUR. SKIN:MAY
CAUSE IRRITATION. INHAL:MAY CAUSE IRRITATION. INGEST:MAY CAUSE
GASTROINTESTINAL IRRITATION. INHALATION OF ZINC FUME MAY PRODUCE
SYMPTOMS KNOWN AS METAL FEVER. SYMPTO MS USUALLY DISAPPEAR WITHIN
24 HOURS. REPEATED AND PROLONGED EXPOSURE MAY CAUSE DELAYED EFFECTS
(SEE EFTS OF OVEREXP)
Explanation of Carcinogenicity:LEAD:GROUP 2B (IARC).
Effects of Overexposure:HLTH HAZ:INVOLVING THE BLOOD, GASTROINTESTINAL,
NERVOUS, AND REPRODUCTIVE SYSTEMS.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.
First Aid
First Aid:EYE:FLUSH IMMEDIATELY WITH COPIOUS QUANTITIES OF WATER FOR AT
LEAST 15 MINUTES. GET MD IMMEDIATELY. SKIN: REMOVE CONTAMINATED
CLOTHING, WASH SKIN WITH PLENTY OF SOAP & WATER. LAUNDER CLOTHES
BEFORE RE USE. INHAL:REMOVE TO FRESH AIR. GIVE ARTIFICIAL
RESPIRATION IF NEEDED. GET MD. INGEST:CALL MD IMMEDIATELY TO
DETERMINE WHETHER OR NOT TO INDUCE VOMITING.
Fire Fighting
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:SMOTHER FLAMES W/EXTING MEDIA. CLSD CNTNRS MAY
EXPLODE WHEN EXPOSED TO EXTREME HEAT. WATER MAY BE USED TO COOL
CLSD CNTNRS. WEAR NIOSH/MSHA APPRVD SCBA (SUPDAT)
Unusual Fire/Explosion Hazard:DRY ZINC DUST FORMS EXPLO MIXTURE
W/AIR.MAY YIELD EXPLO HYDORGEN GAS IF IN PRESENCE OF MOISTURE,
ALKALI/ACID.EXPLO MAY OCCUR IF CONTAM W/STRONG OXIDIZING AGENTS
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN BUILDING DESIGNED AND
PROTECTED FOR STORAGE OF FLAMMABLE POWDERS. AVOID BREATHING OF
DUST/CHIPS FROM SANDING OR BLASTING SURFS COATED W/PROD.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:IN OUTDOOR OR OPEN AREAS, W/UNRESTRICTED
VENTILATION, A NIOSH/MSHA APPRVD FILTER RESP TO REMOVE SOLID
AIR-BORNE PARTICLES OF OVERSPRAY DURING SPRAY APPLIC. IN RESTRICTED
VENT AREAS, USE NIOSH/MSHA APP RVD RESP I/A/W 29 CFR 1910.134
(SUPDAT)
Ventilation:PROVIDE SUFFICIENT VENT IN VOL & PATTERN TO KEEP TLV & LEL
OF HAZ INGREDS BELOW LIMITS & TO REMOVE DECOMP PRODS (SUPDAT)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEM WORK GOG W/FULL LENGTH FSHLD
Other Protective Equipment:WEAR APPROPRIATE IMPERVIOUS PROTECTIVE
CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC:AND FULL PROTECTIVE EQUIPMENT . RESP PROT:TO REMOVE A
COMBINATION OF PARTICULATES AND VAPORS. VENT:DURING WELDING OR
FLAME CUTTING ON SURFACES COATED WITH THIS PRODUCT.
Chemical Properties
HCC:N1
Vapor Density:HVR/AIR
Spec Gravity:7.04
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:POWDER
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
MOISTURE.
Stability Condition to Avoid:KEEP DRY.
Hazardous Decomposition Products:ZINC AND LEAD FUMES.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.